The caul kit includes all the material necessary to create the side mold glue caul and the caul necessary to install the linings. All the material is pre-cut. Masonite is available pre-bent for the guitar in the book and DVD, or straight for a guitar design of your choice. Instructions for construction are included.
$16.99 – $24.99
The side and linings caul kit includes all the material necessary to create the glue caul for the side mold and the caul necessary to install the linings. The kit is available pre-bent to fit the side and lining molds used for the guitar in the book and DVD, and straight for a guitar design of your choice.
The side mold caul kit includes 3 pieces of 32″ x 3-3/4″ masonite thinned down to .090# and 16-3/4″ x 3/4″ x 3-3/4″ pieces of MDF for clamp pads. The masonite is available either straight or pre-bent to fit the mold.
The lining caul kit includes 3 pieces of 1/16″ thick by 5/8″ hardwood veneer( two pieces of maple for the outside face and one piece of mahogany for the middle) and a 3-1/2″ v 5/8″ block of hard maple for the waist area. Instructions are included.
Only logged in customers who have purchased this product may leave a review.
Weight | 4 lbs |
---|---|
Dimensions | 25 × 3 × 4 in |
Caul Type | pre-bent, straight |
toysmith(verified owner) ‚ September 6, 2022
Delivered exactly as described. It was worth ordering rather than thinning down my own Masonite and pre-bending by hand. I’ve constructed a test side with my molds and it works just as I’d hoped.